{"id":1683,"date":"2020-03-16T17:20:16","date_gmt":"2020-03-16T16:20:16","guid":{"rendered":"https:\/\/www.opusdry.it\/solutions\/umidita-da-condensa\/"},"modified":"2021-03-22T10:13:35","modified_gmt":"2021-03-22T09:13:35","slug":"condensation","status":"publish","type":"page","link":"https:\/\/www.opus-dry.com\/solutions\/condensation\/","title":{"rendered":"Condensation"},"content":{"rendered":"

[vc_row row_type=”row_full_center_content” margin_bottom=”0″ padding_bottom=”0″][vc_column width=”1\/2″ el_class=”relative”][vc_column_text css=”.vc_custom_1616081251732{margin-bottom: 20px !important;}”]The phenomenon of “{tooltip}condensation{end-texte}\"\"{end-tooltip}”, <\/strong>occurs when the temperature of the external walls is lower than the “dew point” of the internal air.<\/strong><\/p>\n

In particular, the humidity of condensation originates when, due to a sudden change in temperature, the water vapor abruptly passes from the gaseous to the liquid state, forming a myriad of droplets on the flat surfaces of walls and ceilings.<\/p>\n

Depending on the different ventilation and bad thermal insulation, “condensation” can occur on the surface or even inside the masonry itself.<\/strong><\/p>\n

The phenomenon can manifest itself evidently on the surfaces (surface\u00a0condensation) when the “ventilation” of the environment is deficient and\/or incorrect and in a hidden or hidden way in the wall body when it originates from insufficient insulation (internal condensation)<\/strong>.<\/p>\n

Normal {tooltip}activity inside the home{end-texte}\"\"{end-tooltip}<\/strong><\/p>\n

it is also the cause of a considerable “production” of steam available for the “condensation”<\/strong>\u00a0(sometimes a few tens of minutes of morning ventilation of the premises would be sufficient to dispose of it).<\/p>\n

The appearance of mold in indoor environments is often a consequence also of the inadequacy of the ventilation systems of the living volumes, as well as the condensation phenomena.\u00a0<\/strong>In general, in homes, the necessary air exchange should be close to at least half the volume of air contained in the environment: for each hour n = 0.5 V\/h.\u00a0The mentioned replacement, which should be guaranteed naturally, can also be achieved with special devices.[\/vc_column_text][\/vc_column][vc_column width=”1\/2″][vc_single_image image=”1254″ img_size=”large” alignment=”center” onclick=”zoom”][\/vc_column][\/vc_row][vc_row row_type=”row_full_center_content” margin_top=”30px” margin_bottom=”0″ padding_top=”0″ padding_bottom=”0″][vc_column el_class=”relative”][vc_media_grid element_width=”3″ gap=”15″ item=”289″ grid_id=”vc_gid:1616404309788-f3e5f372-9513-0″ include=”656,616,619,622″ el_class=”allignBottom”][\/vc_column][\/vc_row][vc_row row_type=”row_full_center_content” margin_top=”0″ margin_bottom=”60″ padding_top=”0″ padding_bottom=”0″][vc_column el_class=”relative”][vc_custom_heading text=”The condensation and the thermo-hygrometric conditions that allow it to occur are certainly the fundamental causes that lead to the establishment and growth of molds in the interior of buildings.” font_container=”tag:h2|font_size:20px|text_align:left|color:%233c6422|line_height:28px” use_theme_fonts=”yes” css=”.vc_custom_1616081267888{margin-bottom: 20px !important;}”][vc_column_text]To limit and\/or reduce the extent of the harmful manifestations caused by humidity, it is also possible to act with “light” methods aimed at the reclamation of the settlements (molds etc.) and the punctual reduction of the lack of thermal insulation of the areas concerned.\u00a0<\/strong>These are measures which, while operating on the effects rather than on the causes, as it would be more appropriate to act, can also bring about significant improvements in the significance and consequences of degradation, especially if they are supported by appropriate adjustments of the internal ventilation.\u00a0The measures that can be immediately adopted are attributable:<\/p>\n